Manual
Included: Sight assembly, 2 size "N" or "AA" alkaline batteries (depending on model)
You will need a 7/64" Allen wrench.
The BUSHNELL HOLOsight uses laser light to illuminate a holographic reticle pattern embedded
in the heads-up display window and forms a virtual image of a reticle pattern. The shooter looks
through the heads-up display window and sees a bright red image of a reticle pattern projected onto
the target plane. There is absolutely no light projected onto the target plane, and the sight is legal to
use in most shooting and hunting situations. The BUSHNELL HOLOsight has no magnification.
Depending on the model, your Holosight is powered by either (2) N alkaline 1.5 V batteries or
(2) AA batteries. The BUSHNELL HOLOsight is designed to maintain constant brightness at a
particular setting. The reticle brightness will not fade gradually as the batteries run down but rather
shut down abruptly. The first indication of the batteries draining is the reticle blinking when the
unit is turned on. Another indication of low batteries is the reticle pattern blinking off and on
during recoil. With high recoil guns, this can occur before the battery check indicates low battery
condition. If the reticle pattern blinks off and on during recoil or turns off suddenly, replace the
batteries. Alkaline batteries from different manufacturers are not all constructed the same way. Tests
show some brands are more susceptible to degradation by the shock of recoil.
Removable Battery
Compartment
Elevation Adjustment
Holographic
Window
Brightness
Adjustments Switches
Universal Mount
Windage Adjustment
On/Off Switch
2008 Holosight 510023+510023AP 6LIM rev3.indd 4 2/27/2008 11:07:18 AM










