User's Manual

ManualsBrandsBushnell ManualsCampingEquinox Z2 Night Vision Monocular (6x 50 mm)

Model #s: 260230 / 260240 / 260250 8-18

OWNER’S GUIDE

DIGITAL NIGHT VISION

Summary of content (14 pages)

PAGE 1
DIGITAL NIGHT VISION OWNER’S GUIDE Model #s: 260230 / 260240 / 260250 8-18
PAGE 2
PAGE 3
L PARTS AND CONTROLS GUIDE A. B. C. D. E. F. G. H. I. J. K. L.
PAGE 4
ABOUT BUSHNELL® EQUINOX Z2™ DIGITAL NIGHT VISION Congratulations on the purchase of your Bushnell® Equinox Z2™ Digital Night Vision. Comprised of high quality electronics and optics, the Bushnell Equinox Z2 is a hand-held digital night vision viewing system that utilizes an infrared sensitive CMOS sensor, providing edge-to-edge resolution and outstanding image quality. Fully multi-coated optics increase light transmission and decrease glare. The Equinox Z2 3x30, 4.
PAGE 5
4. (Optional) Adjust Digital Zoom • A digital zoom feature is provided. While viewing normally, tap the Up arrow button on the 4-way Keypad (E) to zoom in 0.1x increments, up to 3x (3 times normal) as indicated at the lower right corner of the display. Hold the button down to zoom in continuously. To zoom back out, tap or hold the Down arrow button on the Keypad. 5.
PAGE 6
NAVIGATING THE MENUS WITH THE KEYPAD AND SELECT BUTTONS While viewing normally with the Equinox Z2, pressing the Select Button (D) will activate the display icons (“HUD”), allowing you to check battery level, recording mode, day/night and IR illuminator settings, etc. After about 5 seconds, the display will return to the normal view, with no visible icons. Pressing the Select Button twice (or once if display icons are shown ) will enter the Settings Menu.
PAGE 7
SETTINGS MENU REFERENCE (default factory settings indicated in bold) SUB MENU (CATEGORY) OPTIONS/ITEMS DESCRIPTION SETTINGS Night Vision Enable Set to “On” for night/low light operation On, Off IR Illumination Set infrared illuminator level or switch off the IR light Off, Low, High Frame Rate Select image frame rate Slow, Medium, Fast Night Filter Color Select image appearance for night Green, B&W Recording Mode Select photo or video image capture Photo, Video Photo Resolution Select
PAGE 8
IR ILLUMINATION, FRAME RATE AND DISPLAY BRIGHTNESS Two different options in the Settings Menu can affect the brightness of the image when using the Equinox Z2 in Night Vision mode (Night Vision “Enable” option set to “On” via Menu system, or by pressing Left/Right button during normal viewing), with “Night” indicated at the bottom center of the display.
PAGE 9
power on the Equinox Z2 before plugging the other end of the USB cable into the computer. The connected Equinox Z2 will be recognized and accessed by your computer the same way an external storage device (portable hard drive or flash drive) would be, as it conforms to the “USB Mass Storage” protocol. Your photo and video files can be found in the DCIM>_MEDIA” folder. The file names start with “DNVM....” followed by a number, in the order they were captured.
PAGE 10
CARE AND MAINTENANCE Your Bushnell Equinox Z2 was designed to provide many years of reliable service. To ensure that you get the most enjoyment out of your digital night vision device, follow these recommendations, guidelines and precautions:  Keep the device away from any heating and air conditioning vents or other heating devices, direct sunlight, and moisture.  Always store the unit in its carrying case in a dry well ventilated space in temperature above +15°C (60° F) and below +48°C (118° F).
PAGE 11
Image at night is black and white Viewed or recorded images at night appear black & white with no colors. 1. This is normal, colors cannot be reproduced under dim conditions using IR illumination as the main source of light. 2. Set Night Vision>Night Filter Color in the Settings Menu to “Green” as alternative to black and white images. TECHNICAL SPECIFICATIONS Specification Magnification (optical) Max.
PAGE 12
Products manufactured on or after April 2017 are covered by the Bushnell Ironclad Warranty. The Ironclad Warranty is a full lifetime warranty that covers the lifetime of this Product. Each Product has a defined lifetime; lifetimes can range from 1 to 30 years. This Product’s lifetime can be found at the website listed below and/or on the Bushnell webpage specific to this Product.
PAGE 13
FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.