INSTRUCTION MANUAL MODEL #: 181561 LIT.
parts diagram G F E I H J L K M D C B A N O P NOTE: Actual product may have improvements that are not shown in this diagram A. B. C. D. E. F. G. H. Yoke Mount Focus Knob Focus Tube Diagonal Eyepiece Finderscope Bracket Finderscope Telescope Main Body I. Sun Shade O. Tripod Leg J. Objective Lens Adjusting Knob (not shown) P. Accessory Tray K. Dust Cap (remove before viewing) L. Yoke Locking Knob M. Azimuth Lock N.
assembly diagrams 1. 2. 3. 4. 5. 6.
TELESCOPE ASSEMBLY INSTRUCTIONS 1. Your telescope has adjustable (telescoping) legs (Fig. 1). 2. Stand tripod and expand legs. Loosen the three leg locks. Grab tripod head and lift. Extend the tripod legs to the desired height (at equal lengths) and tighten the knobs on each leg to hold it in position (Fig. 1). 3. Attach the accessory tray (P) to the center leg braces on the tripod legs (Fig 2) and insert accessory tray and bolt through center of tray into braces and tighten bolt. 4.
Finding Objects 1. Loosen the altitude locks on the sides of the telescope tube and the silver azimuth lock on the base of the altazimuth mount, then move the telescope in the desired direction. 2. Look through the finderscope and pan the telescope until the object appears in the field of view. Once it's in the field of view, tighten the altitude and azimuth locks. Focusing 1. Once you have found an object in the telescope, turn the focus knob until the image is sharp. 2.
WARRANTY / REPAIR LIFETIME LIMITED WARRANTY Your Bushnell® telescope is warranted to be free of defects in materials and workmanship for the lifetime of the original owner. The Lifetime Limited Warranty is an expression of our confidence in the materials and mechanical workmanship of our products and is your assurance of a lifetime of dependable service.
For further questions or additional information please contact: Bushnell Outdoor Products 9200 Cody, Overland Park, Kansas 66214 (800) 423-3537 • www.bushnell.
