Instructions / Assembly

Fig. 5: Attaching the Belt

MOUNTING and POSITIONING

the Trophy Cam HD Aggressor

Mounting

After you’ve set up the camera’s parameters to your personal preferences at home

or in your truck, you’re ready to take it outside and slide the power switch to “ON”.

When setting up the Trophy Cam HD Aggressor for scouting game or other

outdoor applications, you must be sure to mount it in place correctly and securely.

We recommend mounting the Trophy Cam HD Aggressor on a sturdy tree with

a diameter of about 6 in. (15cm). To get the optimal picture quality, the tree should

be about 16-17 ft. (5 meters) away from the place to be monitored, with the camera

placed at a height of 5-6.5 ft. (1.5~2 m). Also, keep in mind that you will get the

best results at night when the subject is within the ideal ﬂash range, no farther than

100ft/30m and no closer than 10ft (3m) from the camera.

There are two ways to mount the Trophy Cam HD Aggressor: using the provided

adjustable web belt, or the tripod socket.

Using the adjustable web belt: Fig. 5 illustrates using the web belt on the Trophy

Cam HD Aggressor. Push one end of the belt through the two brackets on the

back of the Trophy Cam HD Aggressor. Thread the end of the strap through the

buckle. Fasten the belt securely around the tree trunk by pulling the end of the strap

ﬁrmly so there is no slack left.

Using the tripod socket: The camera is equipped with a socket at

the bottom

end to enable mounting on a tripod or other mounting accessories with a

standard1/4-20 thread.

Strap Buckle

Belt Channel