Instructions / Assembly

24
Parameter
Settings
(Bold=default)
Description
Coordinate
Input
Off, On
See "Using the
Setup Menu
Input Screens"
Allows the user to input latitude and longitude
coordinates for the camera’s location. This
data will be embedded in the files saved on
the camera’s SD card (if “On” is selected).
This makes it possible to see each camera’s
location as a “pushpin” on Google Earth
maps when reviewing a folder full of photos
from multiple cameras, or use other “geotag”
capable software (Picassa, etc).
Video Sound
(only affects
video clips in
Video or Hybrid
modes)
On, Off Select “On” to record audio along with the
video when the camera is set to video mode
(saved file sizes will be slightly larger).
Default Set
Cancel,
Execute
Select “Execute” and press OK to restore
all parameters to the original factory default
settings. If the camera is behaving oddly
and you think you may have changed the
setting for something accidently (but aren’t
sure which one), this will reset all parameters
to their most commonly used or “generic”
settings.