Instructions / Assembly

22
Parameter
Settings
(Bold=default)
Description
Sensor Level Low, Normal,
High, Auto
Selects the sensitivity of the PIR sensor. The
“High” setting will make the camera more
sensitive to infrared (heat) and more easily
triggered by motion, and the “Low” setting
makes it less sensitive to heat and motion. The
High setting can be useful when the ambient
temperature is warm (making it more difficult
for the sensor to detect animals), and the Low
setting may help in cold weather if the camera
is being triggered too often by anything warmer
than the surroundings. “Normal” is for average
or moderate conditions. The default “Auto”
setting will allow the camera to determine the
best setting based on its current operating
temperature. This is an ideal setting if the
weather is expected to change significantly
during the period the camera will be used.
NV (Night
Vision) Shutter
High, Medium,
Low
Affects the shutter speed during Night Vision
operation. High will freeze motion better, but
photos may be darker. A Low shutter speed
setting will produce brighter photos, but rapid
motion may be blurred. Medium is a good
compromise.
Camera Mode 24 Hrs, Day,
Night
Allows user to limit operation to only day or night
period if desired. An ambient light level sensor
determines "Day" vs "Night" automatically.
This setting takes priority over any Field Scan
settings.
Format Execute (followed
by an additional
No/Yes step)
Deletes (erases) all files stored on a card to
prepare it for reuse. Always format a card that
has been previously used in other devices.
Caution! Make sure you have downloaded and
backed up any files you want to preserve first!
Press OK to execute, press MENU (or select NO
then press OK) to exit without formatting.