Instructions / Assembly

20
Parameter
Settings
(Bold=default)
Description
LED Control
(Multi-Flash
feature)
Low, Medium,
High
Controls how many LED lamps fire when images
are taken in low light. “High”= all 36 LEDs fire,
which is the default setting. Set to Medium or
Low if you are getting overexposed flash photos
or will place the camera at very close range to
the subject you want to photograph. In general,
select High if most of your intended subjects will
be over 30 ft. from the camera, Medium for the
15 to 30 ft. range, and Low for subjects under
15 ft. away. Note: in video mode, set to LED
Control to “Low” if videos are overexposed at
the Medium setting. At the High setting, videos
at night are limited to 15 seconds maximum
length to prevent overheating.
Camera Name (Input)
See "Using the
Setup Menu Input
Screens"
Allows the user to set a custom name for the
camera. Useful for ID purposes when multiple
cameras are setup, since each camera will
imprint its name on all photos (but not videos) it
captures.
Video Size
(only aects
video clips in
Video or Hybrid
modes)
1920x1080,
1280x720,
640x360
Selects video resolution (in pixels per frame).
Higher resolution produces better quality videos,
but creates larger files that take up more of the
SD card capacity (fills up faster). 640x360 is
VGA video in "widescreen" 16:9 format. The
highest setting provides HD video. Using high
speed SD cards (SanDisk
®
SDHC class 6
or higher) is recommended if you will use the
1280x720 or 1920x1080 video settings.