Instructions / Assembly

19
Parameter
Settings
(Bold=default)
Description
Mode Camera, Video,
Hybrid
Selects whether still photos or video clips are
captured when the camera is triggered. Hybrid
mode combines both Camera and Video, so a
still photo and a video clip are both captured for
each trigger.
Image Size
(only aects
still photos
in Camera or
Hybrid modes)
3M Pixel,
8M Pixel,
14M Pixel
Selects resolution for still photos from 3 to 14
megapixels. Higher resolution produces better
quality photos, but creates larger files that take
up more of the SD card capacity (fills up faster).
8M is a good compromise between quality and
file size.
Image Format
(only aects still
photos-
format for video
is tied to Video
Size)
Full Screen,
Wide Screen
Selects 4:3 (Fullscreen, like old TV sets) or 16:9
(Widescreen, like new flat TVs) “aspect ratio”
for still photos. If you like to view your photos on
a TV set or computer monitor, you can set the
format to match it.
Capture
Number
(only aects
still photos
in Camera or
Hybrid modes)
1 Photo,
2 Photo,
3 Photo
Selects how many photos are taken in sequence
per trigger in Camera mode. This setting affects
photos taken in Field Scan mode as well (to
snap two photos every 10 minutes, for example).
Note: only one photo will be captured if "Interval"
is set to 1 second, regardless of the Capture
Number setting. Please also refer to the Interval
parameter.
The SETUP Menu – Parameters and Settings List
w/Descriptions