Manual

DISASSEMBLING YOUR RIFLE (continued)…
DISASSEMBLE USING STEPS 13 THRU 16 ONLY WHEN DIRTY OR DAMAGED
11
NOTE: Press rear
of extractor to check
spring function.
13.) Remove Extractor Pin by pushing out
with a punch or the tip of a bullet.
14.) Remove Extractor and Spring.
CAUTION: Extractor Spring may
pop out and get lost!
PUSH
EXTRACTOR
PIN OUT
DISASSEMBLING YOUR RIFLE
(continued)…
12
BUFFER
BUSHMASTER
DOES NOT
RECOMMEND
ANY FURTHER
DISASSEMBLY
BUFFER
RETAINER
15.) Press in Buffer, depress Retainer,
and release Buffer.
16.) Remove Buffer and
Action Spring.
STOP
The Handguards may be disassembled at any point in your cleaning
procedures as necessary (see Pg. 27 - “Buddy System” instructions).
If your Rifle is equipped with the A3 Type Removeable Carry Handle,
that may be removed for cleaning by loosening the 2 thumbnuts. Clean as
per instructions for aluminum Upper and Lower Receivers (see Pg. 16).
Lightly lubricate the thumbnut threads and the Rear Sight mechanism (as
described on Pg. 21 - Lubrication - Adjustable Rear Sight).