Manual

25
REASSEMBLY (continued)…
8.) Replace Firing Pin Retaining Pin.
9.) Engage, then push Charging Handle part way.
10.) Position Carrier Key in slotted bottom of
Charging Handle. Slide in Bolt Carrier Group.
NOTE: Firing Pin should not fall out when
Bolt Carrier Group is turned upside down.
CAUTION: Bushmaster does not recommend the practice of swapping bolts between
different rifles. Doing so could result in damage, personal injury or death.
26
CAUTION: Selector Lever should be on SAFE
before closing Upper Receiver.
REASSEMBLY (continued)…
11.) Push Charging Handle and Bolt Carrier
group into receiver together.
13.) Engage Receiver Pivot Pin.
12.) Join Upper and Lower Receivers.