Manual

FRONT
SIGHT
DETENT
19
LUBRICATION - Upper Receiver…
Lightly lubricate the inside of upper receiver, the
bore and chamber (using the cleaning rod and a
patch), the outer surfaces of barrel and front sight,
and surfaces under the handguard. Be sure you lube
in and around all the Locking Lugs (see illustration at right).
Depress the Front Sight Detent and apply two or three drops of
CLP to it. Depress the detent severaI times to work the lubricant into
the spring.
LUBRICATION - Lower Receiver…
Lightly lubricate inside the Lower Receiver Extension (Buffer
Tube), the Buffer and the Action Spring.
Generously lubricate all moving parts inside the Lower
Receiver (trigger, hammer, safety, bolt catch,
forward assist, etc), and their various pins
and detents. Don't forget the
Takedown and Pivot Pins and their
detents. Wipe any fingerprints (they
can start the corrosion process) off
the exterior surfaces with an oiled
rag - a black cloth is best as it won't
leave visible lint.
LUBRICATION - Bolt Carrier Group…
Lightly lubricate the Firing Pin with CLP - also the Firing Pin
recess in the Bolt.
Generously lubricate the Bolt, its Cam Pin area, the Bolt Gas
Rings. A lighter application is good on the Extractor and its Pin.
Lightly lubricate the Charging Handle and the inner and outer
surfaces of the Bolt Carrier.
Generously lubricate the slide and Cam Pin area of the Bolt
Carrier.
The inside of the Carrier Key on the Bolt Carrier should be dried
with a Pipe Cleaner - then place one drop of CLP inside.
20