Instruction Manual

PULL BOLT OUT
INSERT
FIRING
PIN
INSERT
FIRING PIN
RETAINING PIN
7. Drop in and seat Firing Pin. Pull Bolt out, then reinsert Firing Pin Retaining Pin.
NOTE: After inserting
Firing Pin Retaining Pin, Firing Pin should not fall out when Bolt Carrier
Group is turned upside down.
CAUTION: BUSHMASTER DOES NOT RECOMMEND THE
PRACTICE OF SWAPPING BOLTS BETWEEN DIFFERENT RIFLES.
DOING SO COULD RESULT IN DAMAGE, PERSONAL INJURY OR DEATH.
Pg. 39
REASSEMBLING YOUR RIFLE…REASSEMBLING YOUR RIFLE… (Continued)
REASSEMBLING YOUR RIFLE…
0_Placed.qxd 12/28/07 3:30 PM Page 39