Instruction Manual

Pg. 2
• Be sure Cam Pin is installed in the Bolt Group. If it isn’t, your rifle can still fire and WILL
EXPLODE .
• When using a Blank Firing Attachment, NEVER FIRE ANYTHING EXCEPT BLANKS! For your
safety, we recommend the visible, military style blank firing attachment (BFI Part# RAY-008).
• If your rifle stops firing with a live round in the chamber of a hot barrel (a misfire), REMOVE THE
ROUND FAST! However, if you cannot remove it within 10 seconds, remove magazine and wait
15 minutes with the Rifle Pointing in a SAFE DIRECTION! This way you won’t be hurt by a
possible round “cooking-off” (i.e. the round detonating just from the heat of the barrel). In any
event, keep your face away from the ejection port while clearing a hot chamber.
• If your bolt fails to unlock, and you try to free it by tapping the buttstock on the ground while
pulling on the charging handle, keep yourself clear of the Muzzle!
• If there is water in the barrel, do not fire the rifle. IT COULD EXPLODE!
• If you hear a noticeable difference in sound or recoil is experienced, STOP FIRING! Either
condition could indicate an incomplete powder burn and/or a bullet stuck in the bore.
• NOTE: With the bolt carrier assembly locked to the rear, or in its forward position, if the weapon is
dropped or jarred with a loaded magazine in place, a live round could be chambered.
ALWAYS PRACTICE SAFE FIREARMS HANDLING!ALWAYS PRACTICE SAFE FIREARMS HANDLING!
WARNING: WARNING: BEWARE OF DANGEROUS PROCEDURESBEWARE OF DANGEROUS PROCEDURES
FUNDAMENTAL RULES FOR SAFE GUN HANDLING
PLEASE PRACTICE SAFE FIREARMS HANDLING!
0_Placed.qxd 12/28/07 3:30 PM Page 2