Instruction Manual

RUBBER

INSERT

1. Insert Action Spring and Buffer (the Spring will

lock onto the Buffer if you slide it on - then

push and twist counterclockwise). Depress

Buffer Detent and push Buffer in past the

Detent, then release.

2. Insert Extractor

and Spring.

NOTE:

Extractor Assembly has a Rubber Insert within the

Spring. Be sure not to lose it. If the Spring comes loose,

put the large end of the Spring in the extractor and seat

it (a Bullet tip works well).

Then

push

down on Extractor to depress Spring, and

reinsert Extractor Pin.

INSERT

EXTRACTOR

INTO BOLT

Pg. 37

REASSEMBLING YOUR RIFLE…REASSEMBLING YOUR RIFLE…

REASSEMBLING YOUR RIFLE…

0_Placed.qxd 12/28/07 3:30 PM Page 37