Instruction Manual

CLEANING THE LOWER RECEIVER…
Pg. 34
Lower Receiver Extension: Lightly lubricate inside the Lower Receiver
Extension (Buffer Tube), the Buffer and the Action Spring. Also lightly
lubricate the Telestock Latch and exterior of the Receiver Extension.
Lower
Receiver:
Generously
lubricate
ALL
MOVING
PARTS INSIDE
THE LOWER RECEIVER
including the Trigger
,
Hammer, Safety, Bolt Catch, Magazine Release,
etc), and their various Pins and Detents. Don't
forget the Takedown and Pivot Pins and their
Detents. Use an oiled rag to wipe off any
fingerprints on the exterior surfaces (they can
start the corrosion process). A black cloth
is best as it won’t leave visible lint.
LUBRICATE LUGS
Lightly Lubricate the inside of Upper Receiver,
the Bore and Chamber (using the cleaning rod
and a patch), the outer surfaces of the Barrel and
Front Sight, and surfaces under the Handguards. Be sure you lubricate in
and around all the Locking Lugs (as in photo above). The Forward Assist
should also be lightly lubed inside the Receiver and checked for function.
Front Sight
Detent: Depress and apply two or three drops of CLP to it. Depress
the detent severaI times to work the lubricant down into the Spring.
Upper Receiver…
Lower Receiver…
FRONT
SIGHT
DETENT
LUBRICATION – UPPER & LOWER RECEIVERS…LUBRICATION – UPPER & LOWER RECEIVERS…
0_Placed.qxd 12/28/07 3:30 PM Page 34