Instruction Manual

3. Place the
Selector
Lever on
SAFE
4.
Check
for a
Bullet in
the Bore
1.
Remove the Magazine
2.
Lock the Bolt to the rear.
IF A BULLET IS STUCK IN THE BARREL OF THE WEAPON, DO NOT
TRY TO REMOVE IT. TAKE THE RIFLE TO A QUALIFIED GUNSMITH.
DO NOT
APPLY THE “IMMEDIATE ACTIONS”
DESCRIBED ON PREVIOUS PAGES.
WARNING: IF AN AUDIBLE “POP” OR REDUCED RECOIL IS EXPERIENCED DURING
FIRING, IMMEDIATELY CEASE FIRE:
Then, (1.
) Remove the Magazine, (
2.
) Lock the Bolt
to the rear, (
3.
) Place the Selector Lever on the SAFE and (
4.
) visually inspect and/or insert a
Cleaning Rod into the Bore to ensure there is not a Bullet stuck in the Bore.
Pg. 17
BULLET STUCK IN THE BORE…BULLET STUCK IN THE BORE…
FRONT SIGHT…
A2 DUAL APERTURE REAR SIGHT…
0_Placed.qxd 12/28/07 3:30 PM Page 17