Instruction Manual

CLEARING YOUR RIFLE…
Continued on Next Page…
1. Check to
see that there is
NO EXCESSIVE
OIL
in the
Bore. If there is, swab it out with a patch and the
cleaning rod.
ALW
AYS CLEAN A NEW RIFLE BEFORE FIRING.
WARNING!
If the
rifle is fired with oil - or water - in the barrel, excessive pressure will be created causing the
rifle to explode.
2. Retract the Bolt to ensure free
movement between Bolt Carrier
and Gas Tube.
3. Per
form
Safety Function Check
(below) to ensure that Safety
Selector Lever works properly.
1. Remove Magazine if installed. Pull Charging Handle assembly to rear. Check that Chamber is clear. Let the
Bolt and Bolt Carrier close. Do not pull Trigger. Leave Hammer in cocked position.
WARNING: If Rifle
fails any of the following tests, continued use of the Rifle could
result in injury to, or death of, people around you.
2. Place Selector
Lever in
SAFE
position, point rifle in a safe direction, and pull Trigger.
THE HAMMER
SHOULD NOT FALL.
UNLOAD RIFLE - REMOVE MAGAZINE - CHECK CHAMBER
CHECK BEFORE YOU FIRE! …
Pg. 8
PREVENTATIVE MAINTENANCE CHECKS & SERVICES…PREVENTATIVE MAINTENANCE CHECKS & SERVICES…
SAFETY FUNCTION CHECK…SAFETY FUNCTION CHECK…
0_Placed.qxd 12/28/07 3:30 PM Page 8