Operating and Safety Manual

PREVENTATIVE MAINTENANCE CHECKS & SERVICES…
CHECK BEFORE YOU FIRE!
2. Retract the Bolt to ensure free movement of the Bolt Carrier.
3. Perform Safety Function Check (next page) to ensure that Safety
Selector Lever works properly.
4. Ensure the Gas Regulator is set to “U” for unsupressed fire; if firing
with a silencer mounted, set Gas Regulutor to “S” for suppressed fire.
7
NOTE: Gas Regulator must be set correctly for either unsuppressed
or suppressed fire; If not set correctly the Firearm could malfunction
causing personal injury, property damage or death.
WARNING! Never operate Firearm with Gas Regulator set in between
the “U” and “S” settings.
ALWAYS FOLLOW THE RULES OF SAFE FIREARM HANDLING.
First, assume the Firearm you are handling is loaded, and then
proceed - according to the following steps -
to
CLEAR YOUR FIREARM...
1. Check to see that there is NO EXCESSIVE OIL in the
Bore. If there is, swab it out with a patch and the cleaning
rod.
ALWAYS CLEAN A NEW FIREARM BEFORE FIRING.
WARNING!
If the Firearm is fired with oil - or water - in the barrel, excessive pressure will be
created and the Firearm could malfunction causing personal injury, property damage or death.