Operating and Safety Manual

CLEARING YOUR FIREARM…
ALWAYS FOLLOW THE RULES OF SAFE FIREARM HANDLING. First, assume the
firearm you are handling is loaded, and then proceed - according to the following
steps - to
CLEAR YOUR FIREARM . . .
1. Point Firearm in a SAFE DIRECTION! Place Safety
Selector Lever on SAFE.
NOTE: If the Firearm is not cocked, the Safety
Selector Lever cannot be pointed toward SAFE.
2. Press Magazine Release Button and pull Magazine
down to remove.
3. To lock Bolt open, pull Charging Handle rearward. Press upward on the Bolt
Catch and allow Bolt to move forward until it engages the Bolt Catch. If you
haven’t before, now place Safety Selector Lever on
SAFE.
Safety Selector Lever on SAFE.
4. Visually and physically check that the Chamber is clear.
6