Operating and Safety Manual

RE-CONFIGURING THE FIREARM (cont’d.)

3. Still holding the Release Button to the rear, swap Charging Handle to the opposite

side and re-insert or insert alternate Charging Handle.

1. Remove Magazine.

2. Unload and clear Firearm.

3. Remove Hand Guard by pushing the Hand Guard Retaining Pin through as far as it will

go and slide the Hand Guard forward.

4. Lower the Barrel Locking Lever and depress the Barrel Plunger.

5. With the Barrel Plunger depressed, turn the Barrel Locking Lever counter-clockwise

until it stops.

6. Pull the Barrel Assembly forward until it releases from the Trunnion.

CHARGING HANDLE

CALIBER CONVERSION