Manualshelf

Operating and Safety Manual

ManualsBrandsBushmaster ManualsFirearmsACR DMR
31323334353637383940
REASSEMBLING YOUR RIFLE…
(cont’d.)
33
6. Insert Bolt into Bolt Carrier. Twist into position so
Cam Pin can be inserted (remember Cam Pin can only
be installed in Bolt from one side, so if it doesn’t fit
right away, twist the Bolt 180° and try again).
7. Once Cam Pin is inserted, align the ridge on the head
of the Cam Pin so it is parallel with the Bolt.
WARNING: THE CAM PIN MUST BE INSTALLED IN THE BOLT GROUP. IF IT ISN’T, YOUR
FIREARM CAN STILL FIRE AND COULD MALFUNCTION CAUSING PROPERTY DAMAGE,
PERSONAL INJURY OR DEATH.
8. Insert Firing Pin into Firing Pin Spring;
Drop in and seat Firing Pin and
Spring into Bolt Carrier.
9. Lightly press the Firing Pin into the Bolt
Carrier; while holding, insert Firing Pin
Retaining Pin.