Operating and Safety Manual

DISASSEMBLING YOUR FIREARM…

(cont’d.)

3. Remove Piston Rod and Piston Spring

through the front of the Gas Block.

NOTE:

The Gas Piston System can be

disassembled with the Barrel attached

or removed from the Upper Receiver.

DISASSEMBLING THE GAS PISTON SYSTEM

2. Pull Gas Regulator straight out to remove.

1. Depress Regulator Plunger and rotate until it is facing toward the barrel.

BUSHMASTER DOES NOT

RECOMMEND ANY FURTHER

DISASSEMBLY. ANY FURTHER

DISASSEMBLY MUST BE

PERFORMED BY A QUALIFIED

GUNSMITH.