Owner Manual

Congratulations on your purchase of a Bushman DC-X fridge. Please
read these instructions carefully before installation and use.
Please be safe and use common sense and caution when installing, operating
and cleaning this appliance. If you are unsure about any of these instructions,
contact your local dealer before proceeding.
IMPORTANT INFORMATION
Do not lay your fridge on its back, top or sides or at any angle exceeding 30º. If
your fridge has been incorrectly handled, ensure that the fridge is placed in a
level upright position for 12 hours to allow the internal fluids to redistribute
evenly.
Never operate your fridge directly from a 240 V or AC power supply.
Do not use a modified sine wave inverter to operate your fridge.
PRIOR TO INSTALLATION
DELIVERY
At delivery, please check that the fridge is complete and is not damaged in any
way. Remove all packaging and securing tapes from the fridge. To avoid injury
and causing damage to the appliance, be extremely cautious when using
sharp or pointed tools to complete this task.
Do not connect an appliance that has been damaged, contact your local dealer
immediately.
INSTALLATION
Installation of the DC-X range of fridges must be completed by a suitably
trained professional only.