Owner Manual

REVERSING THE FRONT DOOR HINGES
To change the hinge side, simply unscrew the door hinges from the fridge
cabinet, move to the other side and re-affix using the same screws.
MOVING THE DOOR HANDLE
You can replace the front door panel, without having to remove the door
completely.
1. Remove the 2 screws which hold the door handle in place, access is
provided under the logo sticker. You can more easily remove the sticker by
applying moderate heat from a hair dryer.
2. Remove the 2 screws which hold the door handle in place and gently lift the
door handle off.
3. Reposition the door handle on the preferred side.
4. Drill 2 small (2mm) pilot holes through the door handle for the original
screws.
5. Reaffix the door handle using the original screws.
6. Reapply the logo sticker onto the door handle by applying moderate heat to
the sticker.
7. Use the supplied DC-X Series sticker to cover the old screw holes.
REPLACING THE FRONT DOOR PANEL
1. Follow steps 1 to 2 under “Moving the door handle” above.
2. Gently remove the bottom door profile which supports the door panel. Using
a screwdriver gently lever the bottom door profile outwards only. Do not
lever it down.
3. Gently slide the original door panel down and out of the door.
4. Slide the new door panel upwards and into place.
5. Reposition the bottom door profile to be flush.
6. Continue from steps 3 to 6 under “Moving the door handle” above.