Owner Manual

INSTALLATION INTO A CAVITY
DC-X fridges are designed to be installed in a cavity. A gap of minimum 45mm
is recommended for the rear. Refer to the following table and diagram for the
recommended cut-out dimensions. If you are using the mounting kit, allow an
extra 5mm width for the mounting kit frame and screws.
SIDE FRONT
MODEL
CUT-OUT CAVITY DIMENSIONS (MM)
WIDTH
DEPTH
HEIGHT
DC50-X
385
495
530
DC65-X
455
515
530
DC85-X
480
550
630
DC130-X
530
550
755