Instruction Manual

Product support
33
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Your tumble dryer is equipped with a built-in fault detection system, indicated by a combination of flashing operation
lights. The most common failure codes are shown below.
ERROR CODE SOLUTION
E03
Empty the water tank, if problem is
not solved, contact the nearest authorised service agent.
E04
Contact the nearest authorised service agent.
E05
Contact the nearest authorised service agent.
E06
Contact the nearest authorised service agent.
E08
There may be voltage fluctuation in mains.
Wait until voltage is appropriate for working range.
AUTOMATIC FAULT WARNINGS AND WHAT TO DO