Instruction Manual
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions.
30
• This appliance is designed for domestic use
and for the stated purposes only. It is not
suitable for commercial or common use. If
the consumer uses the appliance in a way
that does not comply with these instructions,
we emphasise that the manufacturer and the
dealer will not be responsible for any repair or
failure within the guarantee period.
6 TIPS FOR SAVING ENERGY
1.
Install the appliance in a cool, well-ventilated
room, but not in direct sunlight and not near
a heat source (such as a radiator or oven)
otherwise an insulating plate should be used.
2.
Allow warm food and drinks to cool before
placing them inside the appliance.
3.
Place thawing food in the refrigerator
compartment. The low temperature of the
frozen food will help cool the refrigerator
compartment while the food is thawing. This will
save energy. Frozen food left to thaw outside of
the appliance will result in a waste of energy.
4.
Drinks or other liquids should be covered
when inside the appliance. If left uncovered,
the humidity inside the appliance will increase,
therefore the appliance uses more energy.
Keeping drinks and other liquids covered helps
preserve their smell and taste.
5.
Avoid keeping the doors open for long periods
and opening the doors too frequently as warm
air will enter the appliance and cause the
compressor to switch on unnecessarily often.
6.
Keep the covers of the different temperature
compartments (such as the crisper and chiller)
closed.
7.
The door gasket must be clean and pliable. In
case of wear, replace the gasket.
Product support
Help is always at hand
Product support
7 TECHNICAL DATA
The technical information is situated in the rating
plate on the internal side of the appliance and on
the energy label.
The
QR code on the energy label supplied with the
appliance provides a web link to the information
related to the performance of the appliance in the
EU EPREL database.
Keep the energy label for reference together with
the user manual and all other documents provided
with this appliance.
It is also possible to find the same information in
EPREL using the link https://eprel.ec.europa.eu and
the model name and product number that you
find on the rating plate of the appliance.
See the link www.theenergylabel.eu for detailed
information about the energy label.
8 INFORMATION FOR TEST INSTITUTES
Appliance for any EcoDesign verification shall be
compliant with EN 62552.
Ventilation requirements, recess dimensions and
minimum rear clearances shall be as stated in
this User Manual at Chapter2. Please contact the
manufacturer for any other further information,
including loading plans.
9 CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre,
ensure that you have the following data available:
Model, Serial Number and Service Index.
The information can be found on the rating plate.
Subject to change without notice.
The original spare parts for some specific
components are available for a minimum of 7 or
10 years, based on the type of component, from
the placing on the market of the last unit of the
model.
Visit our website to:
www.bush-support.co.uk