Instruction Manual

27
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Care and maintenance
Looking after your appliance
Care and maintenance
3 CLEANING AND MAINTENANCE
Disconnect the unit from the power supply
before cleaning.
Do not wash your appliance by pouring water
on it.
Do not use abrasive products, detergents or
soaps for cleaning the appliance. After
washing, rinse with clean water and dry carefully.
When you have finished cleaning, reconnect the
plug to the mains supply with dry hands.
• Make sure that no water enters the lamp
housing and other electrical components.
• The appliance should be cleaned regularly
using a solution of bicarbonate of soda and
lukewarm water.
• Clean the accessories separately by hand with
soap and water. Do not wash accessories in a
dish washer.
• Clean the condenser with a brush at least
twice a year. This will help you to save on
energy costs and increase productivity.
The power supply must be disconnected
during cleaning.
• Your appliance performs automatic
defrosting. The water formed as a result
of defrosting passes through the water
collection spout, flows into the vaporisation
container behind your appliance and
evaporates there.
• Make sure you have disconnected the
plug of your appliance before cleaning the
vaporisation container.
• Remove the vaporisation container from its
position by removing the screws as indicated.
Clean it with soapy water at specific time
intervals. This will prevent odours from
forming.
Replacing LED Lighting
If your appliance has LED lighting contact the
help desk as this should be changed by
authorized personnel only.
4
SHIPMENT AND REPOSITIONING
4.1 Transportation and Changing Positioning
• The original packaging and foam may be kept
for re-transportation (optional).
• Fasten your appliance with thick packaging,
bands or strong cords and follow the
instructions for transportation on the
packaging.
• Remove all movable parts (shelves,
accessories, vegetable bins, and so on) or fix
them into the appliance against shocks using
bands when re-positioning or transporting.
Always carry your appliance in the upright
position.
4.2 Repositioning the Door
• It is not possible to change the opening
direction of your appliance door if door
handles are installed on the front surface of
the appliance door.
• It is possible to change the opening direction
of the door on models without handles.
• If the door-opening direction of your
appliance can be changed, contact the
nearest Authorised Service Centre to change
the opening direction.