Instruction Manual

17
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Functions
Simple everyday use
Functions
2 USING THE APPLIANCE
2.1
Information about New Generation Cooling
Technology
Fridges with new-generation cooling technology
have a different operating system
to static fridges. Other (static)
fridges may experience a build up
of ice in the freezer compartment
due to door openings and
humidity in the food. In such
fridges, regular defrosting is
required; the fridge must be
switched off, the frozen food
moved to a suitable container and
the ice which has formed in the
freezer compartment removed.
In fridges with new-generation
cooling technology, a fan blows
dry cold air evenly throughout the
fridge and freezer compartments.
The cold air cools your food
evenly and uniformly, preventing humidity and ice
build-up.
In the refrigerator compartment, air blown by
the fan, located at the top of the refrigerator
compartment, is cooled while passing through the
gap behind the air duct. At the same time, the air is
blown out through the holes in the air duct, evenly
spreading cool air throughout the refrigerator
compartment.
There is no air passage between the freezer and
refrigerator compartments, therefore preventing
the mixing of odours.
As a result, your fridge, with new-generation
cooling technology, provides you with ease
of use as well as a huge volume and aesthetic
appearance.
2.2 Thermostat Setting
The thermostat automatically regulates the
temperature inside the refrigerator and freezer
compartments. Cooler temperatures can be
obtained by rotating the knob to higher numbers,
1 to 5.
Lamp cover
Thermostat knob
2.3 Temperature Adjustment Warnings
• It is not recommended that you operate your
fridge in environments colder than 10°C in
terms of its efficiency.
• Temperature adjustments should be made
according to the frequency of door openings,
the quantity of food kept inside the fridge and
the ambient temperature in the location of
your fridge.
• In order to allow your fridge to reach the
operating temperature after being connected
to mains, do not open the doors frequently
or place large quantities of food in the fridge.
Please note that, depending on the ambient
temperature, it may take 24 hours for your
fridge to reach the operating temperature.
• A 5 minute delay function is applied to
prevent damage to the compressor of your
fridge when connecting or disconnecting to
mains, or when an energy breakdown occurs.
Your fridge will begin to operate normally
after 5 minutes.
• Your appliance is designed to operate in the
ambient temperature (T/SN = 10°C - 43°C)
intervals stated in the standards, according to
the climate class displayed on the information
label. We do not recommend operating your
appliance out of the stated temperature limits
in terms of cooling effectiveness.