Instruction manual PT-941
You’ll soon be enjoying your new Party Speaker. It all begins here, with your instructions. Don’t worry, there’s nothing too technical coming up. Just simple, step-by-step guidance to get you up and running quickly. Sound good? Then let’s get started. Help and Guidance We’re here to help you get the most from your Party Speaker. Should you require any guidance, a simple solution can often be found online at: www.bush-support.
Contents 1 Safety information General safety information 2 3 4 Getting to know your Party Speaker Your Party Speaker 10 Positioning the Party Speaker 12 Power connection 12 Changing the mode 13 Adjusting the volume 14 Equaliser (EQ) function 14 Mega Bass 14 Tone 15 Mute 15 Top face light 15 Main speaker light 15 Using your Party Speaker Connect to a Bluetooth device 18 FM radio 20 Aux in mode 20 Other information Declaration of Conformance 5 6 24 Product support Troubles
This page is left intentionally blank
Safety information 1
Safety information Important - Please read these instructions fully before installing or operating General safety information Keep the product and all its parts out of reach of small children. This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Safety information Important - Please read these instructions fully before installing or operating The battery within this product should not be exposed to excessive heat such as sunshine, fire or the like. CAUTION: Batteries contain substances that may be harmful to the environment and human health. Keep out of the reach of children and seek immediate medical help if swallowed.
This page is left intentionally blank
Getting to know your Party Speaker 2
Getting to know your Party Speaker You’ll be up and running in no time Ready? Let’s begin... Please read these instructions carefully. They contain important information which will help you get the best from your product and ensure safe and correct installation and operation. If you require any further assistance, our technical experts are happy to help. For full details, refer to the product support section at the end of these instructions. Fig 1. 4 1 2 3 1. Power on/off switch 8. Mic 1 socket 2.
Getting to know your Party Speaker You’ll be up and running in no time 5 6 7 8 15 16 17 18 9 10 11 12 19 20 21 22 13 14 23 24 25 26 Fig 2. 15. Microphone echo control 22. Speaker light 16. Microphone volume control 23. Rotary volume control 17. USB 5V/1A charge socket 24. EQ 18. USB Play socket 25. Tone 19. Mute 26. Display 20. Mic first 21. Face light section of these instructions, or online at www.bush-support.
Getting to know your Party Speaker You’ll be up and running in no time Positioning the Party Speaker It is important that you consider carefully in advance where your Party Speaker will be situated and make sure that it is: • on a flat and stable surface. • in a well ventilated, cool, dry, clean place - away from direct sunlight, heat sources, vibration, dust, moisture and/or cold.
Getting to know your Party Speaker You’ll be up and running in no time Note: It willl take approximately 3 hours to fully charge your Party speaker integral battery. You can still use your Party speaker on mains power, whilst the integral battery is charging but the charge time will then be longer. 3. Press the power switch on the back of the Party speaker at the top to On.
Getting to know your Party Speaker You’ll be up and running in no time With the Party speaker powered on and in any mode: 1. Connect the mobile device charging cable (not supplied) to your mobile device and plug the standard USB plug end into the USB 5V/1A charge socket on your Party speaker 2. Your Party speaker will now begin to charge your mobile device. Please check the display. Microphone sockets Your Party speaker has two microphone sockets .
Getting to know your Party Speaker You’ll be up and running in no time Tone 1. Short press the TONE button to access the Party speaker bass and treble settings. 2. When a ‘b’ for Bass or a ‘t’ for Treble is displayed, use the large central volume control to adjust the settings. There are 10 levels available for Bass and Treble. 3. Short press the TONE button again to switch between the Bass (b), Treble (t) and Volume settings. Mute 1. Short press the MUTE button to turn the volume off..
This page is left intentionally blank
Using your Party Speaker 3
Using your Party Speaker Let’s get started Power on After you have connected the power to the Party speaker, press the power switch on the back of the Party speaker at the top to On. The product will switch on, ‘Hi’ will be displayed followed by ‘-bt-’, a bluetooth icon will flash to indicate that you Party speaker is searching for Bluetooth devices. Standby mode If the Party Speaker does not receive an audio signal for approximately 20 minutes, it will go to Standby mode.
Using your Party Speaker Let’s get started Note: Some products will automatically search for a new device and so the ‘Add new device’ option is not available. 4. When found, your Party speaker will be displayed as ‘BUSH PT-941’. Select the device name to begin pairing. 5. When pairing is complete ‘Connected’ will be announced and the bluetooth icon will stop flashing and will remain continuously on. 6.
Using your Party Speaker Let’s get started FM radio If you are not already in FM radio mode, short press the Power/M button to go to FM mode. Check the display, there will be an FM icon and frequency displayed in FM mode. Tuning to an FM station Long press the NEXT button to scan up the FM frequency band. Long press the PREV button to scan down the FM frequency band. Your Party speaker will stop when it receives a strong station signal.
This page is left intentionally blank section of these instructions, or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 600 3021.
This page is left intentionally blank
Other information 4
Other information Helpful technical information Technical specification Audio output: 1 x 25W RMS Power adapter: Input: 100-240V 50/60Hz Output: DC 15.0V 2.0A 30.0W Average active efficiency: 87.70% Efficiency at low load (10%): 86.27% No-load power consumption: 0.060W Integral rechargeable lead-acid battery: 12V/2600mah Aux in socket: 3.5mm USB charge socket: 5V/1A FM Radio: 87.5 MHz to 108 MHz Bluetooth: Version 4.2 Pairing name: BUSH PT-941 Profiles: A2DP, AVRCP Frequency range: 2.
This page is left intentionally blank section of these instructions, or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 600 3021.
This page is left intentionally blank
Product support 5
Product support Help is always at hand Troubleshooting Unable to pair with a Bluetooth device: • Check that you are in Bluetooth mode. • Ensure that you are within range of the Party Speaker for Bluetooth functionality, 10 metres or less (33 feet or less). • Check that the device you are attempting to pair with supports A2DP stereo audio transmission. • Move the Party Speaker and Bluetooth device away from other Bluetooth devices/ electrical equipment.
Product support Help is always at hand Help and assistance If you require any technical guidance or find that your Party Speaker is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 600 3021*. To help give us give you a fast and efficient service please have the following information ready: Model Ref.
Product support Help is always at hand Disposal • Disposal of your old product. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused • When this crossed out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2012/19/EC. • Please make yourself aware of the local collection system for electrical and electronic products.
Product support Help is always at hand Call us now and register your 12 month guarantee Thank you for choosing Bush. Your new product is guaranteed against faults and breakdowns for 12 months. Don’t forget to register it with us today so we can provide you with our best possible after-sales service and useful updates. www.bushregistration.co.uk FREEPHONE* 0800 597 8548 Lines are open 8am - 8pm, 365 days a year. *Calls may be recorded and monitored.
Contact: www.bush-support.
