Instruction manual

English - 35 -
Install Menu
Program 1
Band S
Channel 36
Colour System AUTO
Sound System BG
Fine Tune 0
Search 423.25
VCR Off
Store Program
INSTALL
Program
Press or button to select Program. Use
/ button to select the program number..
You can also enter a number using the
numeric buttons on the remote control. There
are 100 program storage between 0 and 99.
Band
Band can be selected either C or S. Press
/ button to select Band.
Channel
Channel can be changed by / button or
numeric buttons.
Colour System
Press or button to select Colour System.
Use
/ button to change the colour system
to
PAL, SECAM or AUTO.
If sound system is set to
I, SECAM will not be
available for the colour system settings.
Note:In AV modes, you can choose NTSC
3.58, NTSC 4.43 or PAL60 as well.
Sound System
Press or button to select Sound System.
Press
/ button to change the sound
system to
BG, I, DK, L or LP.
Fine Tune
Press or button to select Fine Tune. Press
/ button to adjust the tuning.
Search
Press or button to select Search. Use
/ button to start program searching. You can
also enter the desired frequency using the
numeric buttons while Search item is
highlighted.
VCR
This item can be seen in all modes except for
PC, YPbPr and HDMI.
If you want to watch a VCR source from one of
these modes, then it will be better to set
VCR
mode On. To do this, while the item is
highlighted, press the

/

buttons to set it On.
If you want to watch a
DVD, then you must set
this item as
Off.
Store Program
Press or button to select Store Program.
Press
or OK button to store the settings.
“
Program Stored” will be displayed on the
screen.
ENG-32761-1205UK-32 INCH 17MB26 UK IDTV-(WO SVHS-ECO PIP)(3D PANORAMA)-50138695.p6519.11.2008, 08:3435