Instruction manual

English - 31 -
Menu System
Picture Menu
Mode Dynamic
Contrast 63
Brightness 63
Sharpness 31
Colour 99
Colour Temp Normal
Noise Reduction Low
Store
Film Mode Off
Reset
PICTURE
NO SIGNAL
Mode
For your viewing requirements, you can set
the related
mode option.
Press
or button to select Mode. Press
or button to choose from one of these
options:
Cinema, Dynamic and Natural.
Contrast/Brightness/Sharpness/Colour/
Hue
Press or button to select the desired
option. Press

/

button to set the level.
Note: Hue option can only be visible when
the TV receives an NTSC signal.
Colour Temp
Press or button to select Colour Temp.
Press

/

to choose from one of these
options:
Cool, Normal and Warm.
Note:
• Setting
Cool option gives white colours a
slight blue stress.
• Setting Warm option gives white colours a
slight red stress.
• For normal colours, select Normal option.
Noise Reduction
If the broadcast signal is weak and the picture
is noisy, use
Noise Reduction setting to
reduce the noise amount.
Press or button to select Noise
Reduction
. Press

/

to choose from one of
these options:
Low, Medium, High or Off.
Film Mode
Films are recorded at a different number of
frames per second to normal television
programmes.
Press
or button to select Film Mode.
Press

/

button to set this feature On or Off.
Turn this feature on when you are watching
films to see the fast motion scenes clearly.
Store
Press or button to select Store. Press

or OK button to store the settings. “Stored”
will be displayed on the screen.
Reset
Press or button to select Reset. Press

/

or OK button to reset the picture modes to
factory default settings.
ENG-32761-1205UK-32 INCH 17MB26 UK IDTV-(WO SVHS-ECO PIP)(3D PANORAMA)-50138695.p6519.11.2008, 08:3431