User guide

LATITUDE SERIES
13
Troubleshooting
If a fault occurs, check the points listed below before contacting the Bush Warranty line or taking the radio for repair.
If you are unable to remedy a problem by following these suggestions, please consult your retailer or service
professional.
WARNING: Under no circumstances should you try to repair the set yourself, as this may cause injury or death and
would invalidate the warranty.
PROBLEM
POSSIBLE CAUSE
REMEDY
No sound
Headphones maybe connected
Volume not adjusted
Power cord is not correctly connected
Disconnect the headphones
Adjust the Volume
Connect the power cord properly
Unit Buttons are
not working
Electrostatic discharge
Turn off the unit, disconnect the mains
plug, and reconnect after a few seconds
Radio poor
reception
Weak radio aerial signal
Interference caused by the vicinity of electrical
equipment including TVs, Video Recorders,
Computer, Thermostats, Fluorescent Lamps (TL)
engines etc.
You may not be in a digital radio area
Rotate the aerial for best reception, and
ensure it is fully extended.
Keep the unit away from other electrical
equipment
Check if you receive digital radio via the
online postcode tracker at
www.digitalradioplus.com.au
Technical Specification
Specifications ………………………………………………..
DAB+ and FM radio
Speaker Power…………………………………………..…..
1 W
Frequency Range .………………………………………….
FM: 87.5-108MHz
DAB+: 174 – 240MHz
LCD Display .……………………………..………………….
High resolution display
Power Supply .……………………………………………….
AC/DC Adaptor: DC 6V, 500mA
Max Power Consumption….………………………………..
3W
Dimension .……………………………….………………….
167mm x 40mm x 105mm