User guide

LATITUDE SERIES

1. Press the MODE Button to switch to FM Mode from DAB+ Mode.

2. Once in FM mode, the radio will play from the beginning of the FM frequency range (87.50MHz) or will play the

last FM station that you were listening to.

3. Press the or Button to change the frequency by 0.05MHz.

4. To perform an Auto-scan follow one of the following options:

1. Press and hold the or Button;

2. Press the SELECT dial; or

3. Press the SCAN Button

 Note: The display will show the frequency changing until it stops on the next station.

Scan Setting

 The FM scan will stop when it locates any available station. This may result in a poor signal-to-noise ratio (hiss)

from weak stations.

 To change the scan settings to stop only at stations with strong signal strength:

Press the MENU Button  < Scan setting >  Strong stations only  press the SELECT dial to confirm.

View Station Information

 Note: There is a variety of station information transmitted by broadcast. This radio offers a convenient way to view this

information.

To view currently playing station information, the path is:

Press the INFO button repeatedly to select the option you want your radio display, s such as radio Text, Program

Type, Audio Info, Time and Date. Etc.

To view information of the station that you are listening to, follow this process:

Press the INFO button repeatedly to select the information that you want your radio to display including Radio Text

Information, Station Type, Audio Information, Time and Date.

Using FM Radio