DFTA49DVD Toll Free Warranty and Service: 1800 509 394 Gold Technical Support Line: 1902 215 259 (Charges will apply at $2.
Safety Instructions Always read the safety instructions carefully Keep this Instruction Manual for future reference Keep this device away from humidity Lay this device on a reliable flat sur face before setting it up Do not stand it on soft furnishings If any of the following situation arises, get the Set Top Box checked by a service technician: It has been exposed to moisture It has been dropped and damaged It has obvious sign of breakage It has not been working well or you cannot get it to work according
Introduction Thank you for buying this Bush product, which is designed to give you many years of trouble-free service. You may already be familiar with using a similar unit, but please take time to read these instructions. They are designed to familiarise you with the units’ m any features and to ensure you get the very best from your purchase. Safety is important Your safety and the safety of others is impor tant. Please therefore, ensure you read the “Safety Instructions” before you operate this unit.
About the High Definition Digital Set Top Box with Integrated DVD Player This DVB-T TV Receiver allows you to access Free-to-Air Digital TV Channels and Radio Broadcasts on your TV set. Its digital reception covers VHF & UHF band. Digital TV eliminates noise and inter ference and offers high quality video and audio. An easy to use on-screen installation guide is provided. In addition, a fully featured Remote Control is included that offers you access to every feature with a simple press of a button.
Table of Contents Front Panel and Rear Panel Illustration----------------------------------------------1 Remote Control ----------------------------------------------------------------------2 Connecting to a TV Set---------------------------------------------------------------4 Set Top Box Menu Set Up ------------------------------------------------------------5 DVD Player Menu Set Up------------------------------------------------------------16 MP3/WMA/JPEG/MPEG4 Playback----------------------------------
Front Panel and Rear Panel Illustration Front panel 1 2 4 5 3 6 78 1 Disc Tray: Once you press the Eject Button the Disc Tray will open and you can load your DVD. 2 STANDBY INDICATOR: Standby Indicator will be red if the Set Top Box is in Standby Mode or Green if the unit is on. 3 REMOTE CONTROL SENSOR: Receives the Signal from the Remote Control. 4 EJECT BUTTON: Used to open or close the disc tray in DVD mode. 5 PLAY/PAUSE BUTTON: Used to playback or pause the program being viewed .
Remote Control 1. OPEN/CLOSE:In DVD mode, press the OPEN/CLOSE Button to immediately eject or 1 close the disc tray. NOTE: The OPEN/CLOSE 2 Button has no effect in DVB mode. 3 2. PLAY/PAUSE: In DVD mode, press the 4 PLAY/PAUSE Button to pause or play the DVD 23 5 you are watching. SETUP CH+ SOURCE 24 6 3.REV: In DVD mode, press the REV Button to 7 rewind play of the DVD you are watching. 4. STOP: In DVD mode, press the Stop Button VOL VOL OK 8 + to during play of the DVD you are watching. 25 5.
18. TV/RADIO: Press the TV/Radio Button to switch between TV and Radio modes. 19. MUTE: Press the Mute Button to turn the sound on or off. 20. STANDBY: Press the Standby Button to switch the unit on and off. 21. P/N: Press the P/N Button to switch between PAL and NTSC TV output formats. 22. PREV: Press the PREV Button to skip to the previous chapter or track 23.NEXT: Press the Next Button to skip to the next chapter or track. 24.
Connecting to a TV Set TV Aerial AC 230V ~50Hz CAUTION DFTA49DVD RISK OF ELE CTRIC SHO CK DO NOT OPE N COV ER RF IN SERIAL NO.
Set Top Box Menu Set Up First Time Installation Once you have connected your Set Top Box to your TV correctly and the Mains Power is connected and switched on, you can now turn on your TV. Press the Power Button on your remote to turn on your Set Top Box. If you are using the receiver for the first time or have conducted a Factory Reset, the on-screen Installation Guide will be displayed and will assist you in setting up your Set Top Box.
Program Edit In the Program Menu you are able to select Program Edit. This will allow you to edit your program preferences; lock, skip, favourite, move or delete programs. To enter the Program Edit Menu you will need to enter either your set password or the default password ' 0 0 0 0 0 0 ' . Setting a Favourite Program You can create a shor tlist of favourite programs that you can easily access by pressing the Favourite Button. To set a favourite TV or Radio program: 1.
Skipping a TV or Radio Program You can set your Set Top Box to skip a TV or Radio program, if you desire. To skip a TV or Radio program: 1. Select the program you would like to skip and press the Green Button. A skip symbol will be displayed and the program will be set to skip. 2. Repeat step 1 to set more programs to skip. 3. To confirm and exit the menu, press EXIT key.
EPG (Electronic Program Guide) The EPG is an on-screen TV guide that displays the scheduled programs for the next seven days for every tuned channel (when available from the broadcaster). Press the EPG Button on the Remote Control to access guide. Once you have pressed the EPG Button on the remote control, you can use the Up or Down Button to select the program you wish to view more information about.
When booking a reminder you must select the program you wish to set a reminder message for and then press ENTER to confirm. The program will be displayed in the booking list. Note: In DTV mode, press the Blue Button to view the scheduled reminders in the booking list. In the booking list window the program status is marked in green which is view mode.
LCN (Logical channel number) In the Program Menu you can set the LCN to on or off. Managing your Picture Settings To access the Picture Menu, press the Setup Button and then select Picture. The Picture Menu allows you to manage your picture settings as shown below. Press the Up or Down Buttons to select an option and then press the Right or Left Buttons to adjust that setting . Press the Exit Button to exit the menu , when you have finished .
Channel Search To manage your channel list and to conduct a channel scan you have to enter the Channel Search Menu. To access the menu, press the Setup Button and then select Channel Search. The Channel Search Menu allows you to automatically or manually search for channels and provides you with options to adjust the search settings. Then use the Right and Left Buttons to adjust the setting. Press EXIT to exit the M enu. 1 .
Country You are able to change your country of residence in this section if you need to. Antenna Power If you have an external active antenna, this option will allow you to connect and use this antenna. Time Setting The time setting menu allows you to manage the time function on your set top box. To access the Time Setting Menu select the Time option in the Main Menu. The Time Setting Menu provides you with options to adjust the time. Use the Right and Left Button to then adjust each setting.
1. OSD Language The OSD Language is the language that will be used in the Menu and displayed on the screen. Use the Navigation Buttons and the OK Button to select the language you would like to display. 2. Audio Language The Audio Language allows you to select your preferred audio language. If the language is not available, the default program language will be used. 3. Subtitle Language The Subtitle Language option allows you to set the subtitle language. 4.
3. Factory Default You can select the Factory Default Function in the System Menu. The Factory Default Setting will allow you to reset your Set Top Box to the Default Factory Settings. In Main Menu select [Factory Default] and press OK or RIGHT to select. Enter your password or the default password " 000000 " and press OK to confirm . This option will delete all preset channels and settings . 4.
(b) Photo configure: -Slide Time: adjust slide show interval to 1~8 seconds. -Slide Mode: adjust slide show effect as mode 0~59 or random. -Aspect Ratio: Keep displays the picture as its original aspect, Discard displays the picture in full screen mode. (c) Movie Configure - Aspect Ratio: [Keep]: Play movie as its original aspect. [Discard]: Play movie in full screen mode. - Subtitle Specific: [Small]: Displays the subtitle as small mode. [Normal]: Displays the subtitle as normal mode.
DVD Menu Set Up DVD Menu Operation To enter the DVD Function of the unit, press the Source Button to change from Set Top Box mode to DVD mode. Then press the SETUP Button to enter the Main Menu. Then use the Navigation Buttons to scroll through the menu to select the relevant option you wish to select. Then press OK to confirm. LANGUAGE SETUP Select Language in the setup menu, and display the Language submenu: OSD Language Use this item to select the language of the setup menu and screen display.
Aspect Ratio Select the aspect ratio. Notes: The image display ratio is related to the recorded disc format. Some disc can not display images in the aspect ratio you choose. If you play a disc recorded in 4:3 format on a wide screen TV, black bars will appear on the left and right side of the screen. You must adjust the screen setting depending on the type of the television you have. TV System Select the different TV system. Note: The DVD player setting should be matched to your TV set.
Digital output(Optional) Adjust the audio output on Coaxial por ts to work in harmony with the audio equipment (e.g.receiver, amplifier) connected to the player. Off Digital audio output is disabled. PCM Transfer stereo 2 channels signals RAW: Transfer the DVD original audio track Note: This item is only for the player with coaxial output. Down sampling Select down sampling function on or off. ON: System will down sampling rate for high sampling rate audio(more than 96K). OFF: Disable this function.
Parental Control Set the parental control feature of the player Note: Password is needed before setting Parental Control. Set Password Input four digits (password), then press OK to confirm. Note: If you forget your password, please use the universal password 6666 to unlock. MISC SETUP Select MISC in the setup menu, and display the submenu: Use Default Settings Reset setup data to factory default value. Screen Saver(Optional) Enable/disable the screen saver function. Note: Not all player has this item.
MP3/WMA/JPEG/MPEG4 PLAYBACK The MP3/WMA/MPEG4 disc has such a directory structure as shown picture above . Press Direction key to choose the root directory and then press OK button to enter into the sub directory. Press Direction key to choose the desired track and then press OK or PLAY to enjoy the music or movie. If you want to return to the upper menu, press Direction key to choose the icon and press OK button. Filter: Allows selecting the categories of files displayed in the browser list.
PICTURE CD PLAYBACK The PICTURE CD disc has such a directory structure structure as shown in the following picture. Press Direction key to choose the root directory and then press OK button to enter into the sub directory. Press Direction key to choose the desired picture and then press OK or PLAY to enjoy the picture. If you want to return to the upper menu, press Direction key to choose the icon and press OK button.
Troubleshooting If you experience problems with your Set Top Box/DVD Player, we recommend you follow the below suggestions first which are outlined to assist you with any basic issues. If you continue to have problems we recommend you contact the Bush service and Warranty Toll Free Number - 1 8 0 0 5 09 394 . Problem Possible cause What to do The unit standby light is Mains lead unplugged not on Make sure that the mains power is connected firmly and that the power is switched on.
Specifications Item Specification Tuner Frequency Range Input impedance Demodulation Connectors Power Display Decoding Others VHF: 174MHz to 230MHz UHF: 470MHz to 862 MHZ 75 Ohms unbalanced Signal input level Bandwidth -78 ~ -25DBM Demodulator COFDM OFDM Modulation Packet Carries 2K, 8K FFT, SFN and MFN Guard interval RF IN 1/4, 1/8, 1/16, 1/32 RF Loop Through IEC 165-2 male connector Video Video output, Pr/Pb/Y, audio L/R 7/8MHz 2K/8K IEC 169-2 female connector Coaxial RCA,for SPDIF
24
PO BOX 6287, SILVERWATER NSW 1811 www.bushaustralia.com.
