Instruction manual

Factory Default
In the System Setting Menu you can select the Factory Default option to conduct a
settings reset. In the Main Menu, select [Factory Default] and then press OK or Right
to select. You will then need to enter your password or the default password '000000'
to gain access to this section. Press the OK Button to confirm. Conducting a Factory
Reset will delete all preset channels and settings.
Information
In the System Setting Menu you can select the Information option to view the model,
hardware and software information.
USB is primarily for Software Upgrade, however it does support movie playback.
Software Update
From time to time new software may by available for your digital box, which can be
updated by receiving the software via your aerial or via the USB port.
To access the USB Menu, press the MENU Button and select [USB] using the
Right/Left Navigate Buttons. The USB Menu allows you to play Music, Photo and
Multimedia files. It can support AVI, WMA, JPEG and BMP formats. The unit will only
support USB device with FAT32 file system.
A. Multimedia
When a USB device is connected, you can select from the Music, Photo or Movie
modes using the Right/Left Navigate Buttons and then pressing the OK Button. If a
USB device is not connected, the warning message "No USB device is Found" will
appear.
15
1.Music: To listen to music via your USB, use the Navigation Buttons to select the file
you wish to play and the use the Play, Pause and Stop Button to play MP3 and WAV
music files.
2.Photo: To play an image slideshow or view images from your USB, use the
Navigation Buttons to select the image files you wish to view. You are able to open
JPEG and BMP image files. If the files are in the main folder on the USB they will appear
in thumbnail format on the screen otherwise the folders on your USB will be displayed.