Instruction manual

Manual Search
In the Channel Search Menu you can select Manual Search, which means you can
manually select the channels you wish to search for and store in the channel list. You
can use this option to add new channels to the channel list with out replacing the whole
list.
1. Select the [Manual Search] option and press the OK or Right Navigate Button to begin.
2. Once in the Manual Search option, press the Right/Left Navigate Buttons to select
the channel frequency of the channel you wish to find and store.
3. Press the OK Button to then scan for the frequency selected. When the channel is
found it will be added to the channel list.
Country
In the Channel Search Menu you can change your country of residence.
Antenna Power
In the Channel Search Menu you can turn setting on or off if you have an external
antenna connected.
Time Menu
To access the Time Menu, press the Menu Button and then select the [Time] option.
The Time Menu allows you to adjust the time settings. Press the Up/Down Navigate
Buttons to select a desired option and then press the Right/Left Navigate Buttons to
adjust the setting. Press the OK Button to confirm and the Exit to exit the menu.
Time offset
In the Time Menu you can set the Time offset to auto or manual. Manual will allow you to
adjust the GMT offset time.
Country Region
In the Time Menu you must set your Country Region when the [Time Offset] is set to
Auto.
Time Zone
In the Time Menu you must set the Time Zone Offset when [Time Offset] is set to Manual.
13