Size: 90x128mm
Size: 90x128mm
Important Safety Instructions Please note there are no user serviceable parts in this unit. Do not remove the cover or back for any reason. Refer all servicing to qualified Guundig Service agent. Do not expose the unit to rain or moisture, to prevent fire or electric shock hazards. Do not expose the unit to any liquid or water (dripping or splashing) and no objects filled with water, such as vases, should be placed on the unit.
Introduction Thank you for buying this Bush product, which is designed to give you many years of trouble-free service. You may already be familiar with using a similar unit, but please take time to read these instructions. They are designed to familiarise you with the unit s m any features and to ensure you get the very best from your purchase. Safety is important Your safety and the safety of others is impor tant. Please therefore, ensure you read the Safety Instructions before you operate this unit.
About the Set Top Box This Set Top Box Receiver allows you to access Digital TV Channels and Radio Broadcasts, you can also record your favourite TV programs via an external USB or Hard Disk drive device whilst watching TV.
Table of Contents Front and Rear Panel ...................................................................................... 5 Remote Control...............................................................................................6 Connections..................................................................................................8 First Time Installation......................................................................................9 Troubleshooting...................................
Front and Rear Panel 1. Front panel 1 3 2 1. STANDBY INDICATOR: Displays when the unit is in Power mode and Standby mode. The indicator will show as green when the unit is on and red when in standby. 2. REMOTE CONTROL SENSOR: Receives the signal from your remote control. 3. USB Input: The USB Input allows the unit to Record Live TV, Play multi-media files and Upgrade software when available. 2. Rear panel 1 2 3 5 4 6 7 1. RF IN: This socket allows you to connect your external aerial. 2.
Remote Control 1. LIST: Press the List Button to display your recorded programs list. 2. MUTE: Press the Mute Button to switch off the Sound only. Press again to restore audio output. 3. INFO: Press the INFO Button to display the current channel information. 4. TTX: Press the TTX to enter the Teletext Menu. 5. SUBTITLE: Press the Subtitle Button to select the subtitle setting. 6. EXIT: Press the Exit button to exit the current Menu or return to the previous Menu. 7.
Installing the Batteries Remove the battery cover from the Remote Control and put 2xAAA size batteries inside the compartment. The diagram inside the Battery Compartment shows the correct way to install the batteries. 1.Open the cover 2.Install batteries 3.Close the cover Using the Remote Control To use the Remote Control, point it towards the front of the Digital Set Top Box. The Remote Control has a range of up to 7 metres from the Set Top Box at an angle of up to 60 degrees.
Connections Caution: Make sure to check the voltage specification of the wall outlet is the same rating with the receiver. To prevent the risk of electric shock, do not open the cover or the back of the receiver. TV Aerial TV VIDEO IN YELLOW (Audio) (Video) Coaxial Cable Coaxial Power Adaptor Amplifier Note: 1.When connecting the receiver to other equipment, e.g., TV, VCR and amplifier, make sure to refer to relevant user manual for instruction.
First Time Installation After all connections have been made properly and power is connected, switch on the TV and the Set Top Box. When using the receiver for the first time or after you have conducted a restore to Factory Default the Installation Guide will appear on your TV screen.
Setting Favourite Programs The Favourite function in the Program Edit Menu allows you to create four shortlists of favourite programs that you can easily access. To set a TV program or radio station to your favourites list, please follow the below: 1. Press the Menu Button and use the Navigation Button to highlight the 'Program Edit' option and press [OK]. 2.Press the Navigation Buttons to select and highlight the channel you want to add and then press the Fav Button to add to favourites.
Electronic Programme Guide (EPG) The Electronic Programme guide, is an on-screen TV guide which shows the scheduled programmes for the next seven days. Using the Electronic Programme Guide 1. Press the [EPG] button to enter the on-screen guide. 2. Press the & Navigation Buttons to scroll through the TV programmes on screen. 3. Press the & Navigation Buttons to scroll through the TV channels. 4. Press the Red Button to skip forward one day or press the Green Button to view the previous day. 5.
Picture Setting To access the Picture Menu, press Menu Button then select the [Picture] sub-menu. The Picture menu allows you to adjust the picture and video settings. Press the Up/Down Navigate Buttons to select an option and press the Right/Left Navigate Buttons to adjust that setting. Press the Exit Button to exit the menu. Aspect Ratio The Aspect Ratio allows you to set the TV screen display. You can choose between either 4:3 PanScan, 4:3 Letter Box, 4:3 Full, 16:9 Widescreen or Auto.
Manual Search In the Channel Search Menu you can select Manual Search, which means you can manually select the channels you wish to search for and store in the channel list. You can use this option to add new channels to the channel list with out replacing the whole list. 1. Select the [Manual Search] option and press the OK or Right Navigate Button to begin. 2. Once in the Manual Search option, press the Right/Left Navigate Buttons to select the channel frequency of the channel you wish to find and store.
Auto Standby Auto Standby (inactivity setting) is used to put the Set Top Box into standby if a button hasn't been pressed for 3 hours. The default setting of the Set Top Box is Off. Option To access the Option Menu, press the MENU Button and then select the [Option] Menu. The Option Menu allows you to adjust the OSD Language, Subtitle Language and Audio Language settings. To select an option in the Option Menu press the Right/Left Navigate Buttons to adjust. Press the Exit Button to exit the Menu.
Factory Default In the System Setting Menu you can select the Factory Default option to conduct a settings reset. In the Main Menu, select [Factory Default] and then press OK or Right to select. You will then need to enter your password or the default password '000000' to gain access to this section. Press the OK Button to confirm. Conducting a Factory Reset will delete all preset channels and settings.
3.Movie:To watch movies via your USB, use the Navigation Buttons to select the file you wish to play and then use the Play, Pause and Stop Button to play MPEG2, XVID, AVI, MKV and VOB video files. Please Note: Not all profile's are supported. 4. PVR: You can record live TV straight to your USB storage device (pendrive / hard disk) by inserting the USB into the side of the unit and pressing the Record Button to start the recording. To stop recording, press the Stop Button.
Please Note: - Not all USB devices may be supported by this unit and we assume no responsibility for any loss of data that may occur. - Large data files may take longer to read, please be patient while the USB loads. - Some USB devices may not be recognised as the unit will only support USB devices with the FAT32 file system. - We recommend formatting the USB first before recording. Please follow the below instructions on how to format your USB. D.
Technical Specifications Item Sub Item Parameter Tuner Input Frequency 170~230MHz 470~860MHz RF Input level -25~-78dBm IF Bandwidth 7MHz and 8MHz Modulation QPSK,16QAM,64QAM Decoder Format MPEG2 MP@ML MPEG4 MP@ML Output Format 576P, 720P, 1080i,1080P Output Port HDMI Video CVBS (RCA) Audio Decoder Format MPEG-1 (layer1&2) Audio output Digital audio: S/PDIF Analog audio: L/R Power Voltage DC 5V Supply Power Max 8W 18
Warranty Please keep your receipt as proof of purchase. This product is warranted for any defect in materials or workmanship for one year after the original date of purchase. This product is for normal domestic and office use only. This warranty does not cover damage from misuse or neglect, accidental damage, vermin infestation, excessive voltages such as lightning or power surges or any alteration that affects the performance or reliability of the product.
