Owner's manual

BUSH BCR33DABIP
6
Displaying Signal Strength
1. While a DAB+ program is playing, press the INFO button repeatedly until the LCD screen displays a signal bar to
show the signal strength of this program.
The indicator on the signal bar shows the minimum acceptable
signal level.
 Note: Stations with signal strength below the minimum signal level will
not provide a steady stream of audio.
Tuning to Another Station
1. While playing a DAB+ program, press the or button to enter the Station list.
2. Press the button to select to play the desired station.
Updating the Station List
 Note: It’s a good idea to carry out a scan and then make sure that you have the most up to date station list stored in the
memory of your radio.
1. Press the SCAN button. The Full Scan will scan automatically and store all available stations.
Please note that there is also an alternative way to conduct this function,
the path is: press MENU  Full scan, press the button to confirm.
Remove Inactive Stations
 Note: By following this process, inactive stations will be removed from your radio station list.
1. Press the MENU button, and then press the or button to Prune, press the button to confirm.
2. Press the or button to YES, press the button to confirm.
Using DAB+ Radio