Owner's manual

BUSH BCR33DABIP
13
2. Press the or button to “Off”, press the button to confirm, once confirmed it will display
„Alarm saved‟.
Set the Language
1. The path is: press MENU  < Language >, press the button.
2. Press the or button to your preferred language option, press the button to confirm.
Perform a Factory Reset
 Note: Conducting a Factory Reset will reset and delete all unit settings including alarms and stored stations. It will return the
radio to its original factory settings.
1. The path is: press MENU  < Factory Reset >, press the button.
2. Press the or button to „Yes‟, press the button to confirm.
Display the Software Version
 Note: In the event that you experience any issues with this product, the helpdesk may ask you for the software version of
your product.
1. The path is: press MENU  < SW Version >, press the Button, the display will show the software version
as outlined below:
Set the Display Dimmer
 Note: This unit offers different display dimmer levels, ranging from low to high.
1. Press the DIMMER button repeatedly to adjust the dimmer settings.
Adjust the Volume Level
1. Press the or button repeatedly to adjust your volume level.
System Setup