Other Document

18 Installing your refrigerator
Installing your refrigerator
Bringing it all together
Door Reverse
Warning: Remove the main plug
before reversing the door. 2 people
may be
required to reverse the door. The refrigerator
has the capability of opening the door from
either the left or the right side. The unit is
delivered to you with the door opening from
the left side. To change the opening direction,
please follow these instructions.Note: Before
reversing the door swing, unplug the
appliance from the mains or disconnect the
electrical power supply.
1.
Unscrew and remove the hinge cover.
2.
Unscrew and remove the hinge.
3.
Unscrew middle hinge. Then lift lower door
and place it on a soft pad to avoid
scratching.
4.Move the hinge hole covers from left side to
right side.
5.Unscrew bottom hinge. Then remove the
adjustable feet from both sides.
6.Unscrew and remove the bottom hinge pin,
turn the bracket over and replace it.
7.Refit the bracket fitting the bottom hinge
pin.Replace both adjustable feet. Transfer
the lower door onto the lower hinge pin.
8.Remove the original aid-closers from the upper
and lower door, then install the aid-closers from
the manual bag.
9. Make the middle hinge reverse the direction
180C,then transfer it to the left property position.
Make the middle hinge pin in the upper hole of
the lower door, then tight the bolts.
10.Place the upper door back on. Ensure the
door is aligned horizontally and vertically so
that the seal are closed on all sides before
finally tightening the top hinge. Then insert
the hinge and screw it to the front of the
unit.
11.
Unscrew the hinge pin and reverse the
hinge, then reinstall the hingepin.
12.
Prise the hinge hole cover.
13.
Fix the hinge on the left.
14. Fix the hinge cover on the left and the
hinge hole cover on the right (the hinge
hole cover is placed in the manual bag).
Levelling the appliance
1.Rotate feet clock wise to heighten.
2.Rotate feet anti clock wise to lower.
(1) (2) (3)
(4) (5)
(6)
(7)
(9)
(11) (12)
(14) (15)
(13)
(10)
(8)