You'll soon be enjoying your new BUSH Cassette Player/Recorder. It all begins here, with your instructions. Don't worry, there's nothing too technical coming up. Just simple, step-by-step guidance to get you up and running quickly. Sound hoed? Then let's get started. Help and Guidance We're here to help you get the most from your cassette player/recorder.
Contents 1 Safety information Safety information [3 2 Getting to know your Cassette Player/Recorder Ready? Let's begin 10 Accessories un Connection 12 Battery installation 13 AC power converter 14 Car adapter{optional) 14 Headphone included) 14 3 Using your Cassette Player/Recorder Inserting or remove cassette 16 Tape play 16 Built-in microphone recording 17 Automatic stop 17 Stand-up microphone recording 17 Tape erase 17 Rewind 17 Fast Forward (F-fwd} 18 Pause control 18 USB play and recording from MIC 18
Contents 4 Other information Technical specification 24 5 Product support Troubleshooting 26 Help and assistance 27 Disposal 28 Guarantee 29 you require any technical guidance or find that your product I not operating a intended, a simple solution can often be found in the Troubleshooting
AN Safety information Important Please read these instructions fully before installing or operating Your unit should be treated with care. The information below has been provided in the interest of safety and will help you to enjoy this product and the benefits it brings for many years. » Keep the product and all its parts out of reach of small children.
* If the unit will not be used for a long period of time, make sure that all of the batteries are removed from the battery compartment. + Do NOT use harsh chemicals, cleaning solvents or detergents to clean the product. Wipe with a damp (not wet) soft cloth to clean. WARNING: To prevent possible hearing damage, do not listen to this unit at high volume levels for long periods of time.
If any items are missing or damaged, contact your nearest Argos store for a replacement. Have your receipt ready when you call. Retain the packaging. If you dispose having regards to any recycling regulations in your area.
Getting to know your Cassette Player/Recorder You'll be up and running in no time Ready? Let's begin... Please read these instructions carefully. They contain important information which will help you get the best from your product and ensure safe and correct installation and operation. If you require any further assistance, our technical experts are happy to help. For full details, refer to the product support section at the end of these instructions. Accessories 1 AC adapter 2.
Getting to know your Cassette Player/Recorder You'll be up and running in no time COVE PHONE VOLUME mmm RECORD PLAY REWIND F-FWD STOP/EJECT PAUSE If you require any technical guidance or find that your produce I it operating as intended, a simple solution's can often be found in the Troubleshooting Getting to know your Cassette Player/Recorder.
Getting to know your Cassette Player/Recorder You'll be up and running in no time Connection Please consider carefully where your unit will be situated and make sure that it is: » flatland stable surface = The device is designed for power supply AC adapter (DC 6V) » Connect the smaller plug to the DC jack at the left side of the device. « Make sure that the plug is completely inserted. « Insert the adapter to a wall outlet (230V) .
Getting to know your Cassette Player/Recorder You'll be up and running in no time Powering the Recorder Battery installation 1 To remove the battery compartment door{located on the cabinet bottom)press the snap tab and lift the door off the cabinet back. 2. Insert 4 “R14” (C batteries(not included)into the battery compartment. Be sure the or cap end of each battery is installed as show on the battery diagram. 3. Replace the battery door.
Getting to know your Cassette Player/Recorder You'll be up and running in no time AC power converter The AC Power Converter plugs into the 6-V DC PWR JACK on the recorderiwhich automatically disconnects the batteries), and plugs into 230-volt AC household power. IMPORTANT: The AC Power Converter coming with this unit is intended to be correctly orientated in a vertical or floor mount position. Car adapter(Optional) Your recorder may be operated from the cigarette lighter socket in a car.
Using your Cassette Player/Recorder Let's get started To insert or remove cassette 1. Press STOP/EJECT if any of the buttons are depressed. 2. Press STOP/EJECT to open CASSETTE DOC. 3. Insert a cassette tape with a full reel at its left and open edge facing towards you, then push on the deck door to close. Unload a cassette tape by following the above steps 1 ans 2, take out the tape,push on the deck door to close.
Using your Cassette Player/Recorder Let's get started Built-in microphone recording 1 Insert cassette as previously described. Press Recording PLAY button is depressed with are now recording. If the RECORD button does not depress, see’PREVENT ACCIDENTAL ERASURE". 2. Talk normally into the BUILT-IN CONDENSER MICROPHONE. To obtain optimum recording quality, place the recorder with the microphone freely exposed and as close as convenient to the sound source. 3.
Using your Cassette Player/Recorder Let's get started press REWIND. Then press STOP after you have rewound to the desired point on the tape. Fast Press F-FWD to skip over portions of the tape quickly. Press STOP after you have advanced to the desired point on the tape. Pause control Your recorder is equipped with a PAUSE control which will stop PLAY & RECORD operation. Press PAUSE to stop PLAY or RECORD operation. Press again to release PAUSE for continued operation. USB Play and Recording from MIC 1.
Using your Cassette Player/Recorder Let's get started Recording from Tape to USB 1. Set USB/TAPE switch to TAPE and play the tape, insert the USB device to USB port, press and hold the PLAY/PAUSE/REC button to record from the tape, the red REC indicator will keep blinking rapidly. Press the PLAY/PAUSE/REC button again to stop Recording. 2. Set USB/TAPE switch USB, Press PLAY/PAUSE button to playback music from USB device. Press PLAY/PAUSE button again to stop play.
Using your Cassette Player/Recorder Let's get started Care & Maintenance Prevent accidental erasure Whenever you make a recording, any previous recording on the tape is automatically erased When you have a recording you want to keep permanently, snap out the rear left tab of the side you want to save as shown in the illustration below.
Using your Cassette Player/Recorder Let's get started Tape care -Don't expose tapes to sunlight or store in hot places. High temperatures may warp the shell or damage the tape itself. -Keep cassettes in their boxes when not in use. -Cassette tapes can be erased by magnetic fields produced by magnets,electric motors,electrical transformers,and other devices. Keep tapes away from magnets and magnetic fields.
Other information Helpful technical information Specification External AC/DC adapter: DC6V=== 600mAc—e—= (AC adapter (Adapter included) Batteries: 4 x 1.
Product support Help is always at hand Troubleshooting If Incomplete erase or muffled playback sound, please cleaning the heads Iron oxide particles from the magnetic tape can build up on the parts that come in contact with the tape These deposits can cause incomplete erasure muffled playback sound,and might prevent automatic stop To clean a cassette tape,open the compartment door,push the PLAY button and gently and gently clean the heads, capstan,and pinch wheel with a head cleaner.
Product support Help is always at hand Help and assistance If you require any technical guidance or find that your Bluetooth CD Boombox is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions or online at If you still require further assistance, call one of our experts on 0345 604 0105 . To help give us give you a fast and efficient service please have the following information ready: You can find these Model Ref.
Product support Help is always at hand Disposal The symbol on the product or its packaging indicates that this product may not be treated as household waste. Instead it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
BUSH Call us now and activate your 12 month guarantee Thank you for choosing Bush. Your new product is guaranteed against faults and breakdowns for 12 months. Don't forget to register it with us today so we can provide you with our best possible after sales service and useful updates. www.bushregistration.co.uk FREEPHONE* 0800 597 8548 Lines are open 8am 8pm, 365 days a year. *Calls may be recorded and monitored.
+ lt must be used solely for domestic purposes. The guarantee will be rendered invalid if the product is re-sold or has been damaged by inexpert repair. + Specifications are subject to change without notice. + Bush disclaim any liability for loss or damage arising from the breakdown of the product. + This guarantee is in addition to and does not diminish your statutory or legal rights.
