Operator`s manual

2-2 OPTIONAL VALVE MOUNTING

BRACKET INSTALLATION

(Figure 23)

A. Place bottom bracket at desired mounting loca-

tion. Mark 2-4 holes (as needed) for drilling using

bracket as pattern. Drill holes using 13/32 drill bit.

B. Mount lower bracket using four 3/8 x 1-1/2” bolts,

nuts, flatwashers and lockwashers.

Figure 2-3 Valve Bracket Installation

3/8” Hex Nut

3/8” Lockwasher

3/8” x 2-1/2”

Capscrew

(3 Furnished)

Tractor Fender

3/8 x 1- 1/2” Capscrew

(4 Furnished)

3/8” Flatwasher

3/8” Lockwasher

3/8” Hex Nut

Hydraulic Valve

Valve Plate

Base Plate

C. Attach valve to top bracket using three 3/8” x 2-

1/2” bolts, nuts and lockwashers.

D. Mount top bracket to bottom bracket using quar-

ter turn fasteners. Insert quarter turn fastener into

clip-on receptacle and turn 90 degrees.