User Manual

15
10. Overview of the key functions
Take&Talk universal
Status
Status
description
Press Plus key
short
Hold Plus
key for
3 seconds
Press Minus
key short
Hold Minus
key for
3 seconds
Hold Plus and
Minus key for
3 seconds
Press Minus
key twice
Hold Plus and
Minus key for
6 seconds
Stand-by
When Take&Talk
universal is
not connected
with phone
-
Connecting with
last connected
phone, if not
available try
to connect to
a phone from
phone list
- - - Reset to default
Connected
When Take&Talk
universal is
connected with
phone, no call
-
Multipoint
on/off
(4 same beeps
is on)
-
Disconnect
Bluetooth
Turn on / off
DSP* in the
phone (Tones
up is on, Tones
down is off)
Redial Reset to default
Ring
When Take&Talk
universal is
connected with
phone and
incoming call is
present
- Accept call - Rejects call - -
Active call
When Take&Talk
universal is
connected with
phone and call is
active
Volume up - Volume down Quit call - -
Outgoing
call
When Take&Talk
universal is
connected with
phone and call is
active
- - - Quit call - -
* DSP = to lter out echoes and background noise