Operating Instructions
Table Of Contents
- Table of Contents
- General instructions
- Overviews
- Displays
- Operation
- Ignition switch/steering lock
- Ignition with Keyless Ride
- Emergency-off switch
- Lighting
- Dynamic Traction Control (DTC)
- Electronic chassis and suspension adjustment (D-ESA)
- Riding mode
- Cruise control
- Distance control (ACC)
- Hill Start Control
- Anti-theft alarm system (DWA)
- Tire pressure control (RDC)
- Heating
- Storage compartment
- Central locking system
- Cases
- TFT display
- Audio system
- Setting
- Riding
- Technology in detail
- Maintenance
- Accessories
- Care
- Technical data
- Service
- Appendix
- Index
93
Press button 1 or button 2.
One sound signal is issued
and the LED 3 goes out.
Replacing battery in the
remote-control unit
with central locking system
OE
with anti-theft alarm system
(DWA)
OE
without Keyless Ride
OE
If the LED lamp on the remote-
control unit fails to light up
when a button is pressed, or
only lights up briefly:
Replace the battery in the re-
mote-control unit.
Open the battery compart-
ment cover 1.
Dispose of the old battery in
accordance with legal reg-
ulations. Do not dispose of
the battery in the household
waste.
ATTENTION
Unsuitable or improperly in-
serted batteries
Component damage
Use a battery compliant with
the manufacturer's specifi-
cations.
When inserting the battery,
make sure that the polarity
is correct.
Insert the new battery with
the positive terminal facing
upwards.
Battery type
For remote-control of central
locking system
CR 2032
The LED on the remote con-
trol lights up; the remote con-
trol has to be synchronized.
Press button 1 twice.
LED 3 flashes for a few sec-
onds.