Operating Instructions

84 OPERATION
5 flashes: tilt sensor 3
Deactivation
Switching on the ignition
( 58).
Turn indicators are illuminated
once.
Confirmation tone sounds
once (if programmed).
DWA is switched off.
with central locking system
OE
or
with Keyless Ride
OE
Press button 1 on the remote
control or radio-operated key
once.
If the alarm function is de-
activated using the radio-
operated key and the ignition
is not then switched on, it will
reactivate automatically after
30 seconds if "activation after
ignition off" is programmed.
Turn indicators are illuminated
once.
Confirmation tone sounds
once (if programmed).
DWA is switched off.
Adapting DWA
Switching on the ignition
( 58).
Call up the Settings, Ve-
hicle settings menu and
select Alarm system.
The following adjustments are
available:
Adapting Warning signal
Switching Tilt sensor on
and off
Switching Arming tone on
and off
Switching Arm automati-
cally on and off
Possible settings
Warning signal: Set in-
creasing and decreasing or in-
termittent alarm tone.
Tilt sensor: Activate the
tilt sensor to monitor the tilt
of the vehicle. The DWA anti-
theft alarm system responds,
for example, in the event of at-
tempted wheel theft or towing.
Deactivate the tilt sensor
when transporting the ve-
hicle to avoid triggering the
DWA.
Arming tone: Confirmation
alarm tone after activating/de-
activating the DWA in addition
to flashing turn indicators.
Arm automatically: Auto-
matic activation of the alarm