Operating Instructions

83
Confirmation tone sounds
three times (if programmed).
Tilt sensor is deactivated.
Alarm signal
The DWA alarm signal can be
triggered by:
Tilt sensor
Switch-on attempt with an
ignition key.
Disconnecting the DWA from
the vehicle battery (DWA bat-
tery takes over the power
supply – alarm sound only,
hazard warning lights do not
flash).
If the DWA battery is dis-
charged all functions remain
operational; the only difference
is that the alarm cannot be
triggered if the system is
disconnected from the vehicle
battery.
The duration of the alarm sig-
nal is approx. 26 seconds. Dur-
ing the alarm, an alarm signal
sounds, and the turn indicators
flash. The type of alarm sound
can be set by an authorized
BMW Motorrad retailer.
with central locking system
OE
or
with Keyless Ride
OE
You can cancel an alarm sig-
nal at any time by pressing the
button 2 on the remote control
or the radio-operated key, with-
out deactivating the DWA.
If an alarm signal has been
triggered while the motorcycle
was unattended, the rider is
notified accordingly by an
alarm tone sounding once
when the ignition is switched
on. The indicator light in the
instrument cluster then signals
the reason for the alarm signal
for one minute.
Light signals on indicator
light:
1 flash: tilt sensor 1
2 flashes: tilt sensor 2
3 flashes: ignition switched
on with unauthorized ignition
key
4 flashes: DWA disconnected
from motorcycle battery