Operating Instructions
Table Of Contents
- Table of Contents
- General instructions
- Overviews
- Displays
- Operation
- Ignition switch/steering lock
- Ignition with Keyless Ride
- Emergency-off switch
- Lighting
- Dynamic Traction Control (DTC)
- Electronic chassis and suspension adjustment (D-ESA)
- Riding mode
- Cruise control
- Distance control (ACC)
- Hill Start Control
- Anti-theft alarm system (DWA)
- Tire pressure control (RDC)
- Heating
- Storage compartment
- Central locking system
- Cases
- TFT display
- Audio system
- Setting
- Riding
- Technology in detail
- Maintenance
- Accessories
- Care
- Technical data
- Service
- Appendix
- Index

82 OPERATION
ANTI-THEFT ALARM SYSTEM
(DWA)
with anti-theft alarm system
(DWA)
OE
Activation
Switching on the ignition
( 58).
Adapting DWA ( 84).
Switching off the ignition
( 59).
If the DWA is activated, the
DWA is automatically acti-
vated after the ignition is
switched off.
Activation takes approximately
30 seconds to complete.
Turn signals are illuminated
twice.
Confirmation tone sounds
twice (if programmed).
DWA is armed.
with central locking system
OE
or
with Keyless Ride
OE
Switching off the ignition
( 59).
Press button 1 on the remote
control or radio-operated key
twice.
See also the other func-
tions of the remote con-
trol for the central locking sys-
tem.
Activation takes 30 seconds
to complete.
Turn signals are illuminated
twice.
Confirmation tone sounds
twice (if programmed).
DWA is armed.
To deactivate the tilt sen-
sor (for example, if you are
about to transport the mo-
torcycle on a train and the
strong swaying movement of
the moving train could trip the
alarm), press button 1 on the
remote control or the radio-
operated key during the acti-
vation phase again.
Turn indicators are illuminated
three times.










