Operating Instructions

81
Alternatively, apply the brake
for about one second after
the vehicle has come to a
standstill, with a gradient of
at least 3%.
is displayed in green.
Hill Start Control Pro is acti-
vated.
To switch off Hill Start Con-
trol Pro, activate the hand-
brake lever 1 or the footbrake
lever again.
If Hill Start Control Pro
was deactivated using
the brake lever, automatic
Hill Start Control is deactivated
for the next 4 m.
is displayed in white.
Alternatively, ride off in 1st or
2nd gear.
Hill Start Control Pro is
deactivated automatically
when driving off.
disappears after the brake
has been released com-
pletely.
Hill Start Control Pro is deac-
tivated.
For more information on Hill
Start Control Pro, see Tech-
nology in detail ( 185)
chapter
Adjusting Hill Start Control
Pro
with riding modes Pro
OE
Switching on the ignition
( 58).
Call up the Settings, As-
sist menu, then select HSC
Pro.
To switch off Hill Start Con-
trol Pro, select Off.
Hill Start Control Pro is deac-
tivated.
To switch on manual Hill Start
Control Pro, select Manual.
Hill Start Control Pro can be
activated by firmly applying
the handbrake or footbrake
lever.
To switch on automatic Hill
Start Control Pro, select Auto.
Hill Start Control Pro can be
activated by firmly applying
the handbrake or footbrake
lever.
When applying the brake for
approximately one second af-
ter the vehicle has come to a
standstill and on a slope with
at least a 3% gradient, Hill
Start Control Pro is activated
automatically.
The selected setting is re-
tained even after the ignition
is turned off.