Operating Instructions
Table Of Contents
- Table of Contents
- General instructions
- Overviews
- Displays
- Operation
- Ignition switch/steering lock
- Ignition with Keyless Ride
- Emergency-off switch
- Lighting
- Dynamic Traction Control (DTC)
- Electronic chassis and suspension adjustment (D-ESA)
- Riding mode
- Cruise control
- Distance control (ACC)
- Hill Start Control
- Anti-theft alarm system (DWA)
- Tire pressure control (RDC)
- Heating
- Storage compartment
- Central locking system
- Cases
- TFT display
- Audio system
- Setting
- Riding
- Technology in detail
- Maintenance
- Accessories
- Care
- Technical data
- Service
- Appendix
- Index
80 OPERATION
Apply handbrake lever 1 or
footbrake lever firmly and
then release again.
is displayed in green.
Hill Start Control is activated.
To switch off Hill Start Con-
trol, activate the brake lever 1
or the footbrake lever again.
is hidden.
Alternatively, ride off in 1st or
2nd gear.
Hill Start Control is deacti-
vated automatically when
driving off.
disappears after the brake
has been released com-
pletely.
Hill Start Control is deacti-
vated.
For more information
on Hill Start Control, see
Technology in detail ( 185)
chapter.
Operating the
Hill Start Control Pro
with riding modes Pro
OE
Requirement
Vehicle is at a standstill with
engine running.
ATTENTION
Failure of the drive-off assis-
tant
Risk of accident
Secure the vehicle through
manual braking.
Hill Start Control Pro is
only a comfort system to
make starting on hills easier
and should therefore not be
confused with a parking brake.
Hill Start Control Pro
drive-off assistant should
not be used for gradients of
more than 40%.
Apply handbrake lever 1 or
footbrake lever firmly and
then release again.